Lexmark X646ef Menus And Messages Manual page 94

Menu item Purpose
Protect Menus
(continued)
Create/Change See Create, Change, or Remove Passwords on page 95.
Passwords
NTLM Allows registration or
Authentication removing registration of
Setup the MFP with an NT
domain by a user with
administrator privileges on
the domain.
Note: Either Registered
or Not Registered
appears on the status
message bar. Continue is
the pop-up message for
removing registration.
Using the MFP menus
Values and descriptions
LES configuration
Not protected
Accept Advanced
Password only*
Accept Advanced or User
Passwords
Domain Name
Domain PDC Name
Settings
94
Protection is not applied for Lexmark
Embedded Solutions (LES)
configuration unless the password is
set, meaning that the password field
cannot be a null field.
Domain Name—Enter the text entry
for the domain name. The factory
default for the variable domain name
is <domain>. Use the virtual
alphanumeric keyboard to enter the
text.
Domain PDC Name—Enter the text
entry for the domain PDC name. The
factory default for the Domain PDC
Name variable is an asterisk (*). Use
the virtual alphanumeric keyboard to
enter the text.
Note: Other pop-up messages
include:
• Unregistering this device will
prevent any use of NTLM
authentication until the device is
registered again.
• Keep registration
• Unregister now