Lexmark X646ef Menus And Messages Manual page 114

Message
39 Complex page, some
data may not have
printed
42.xy Cartridge region
mismatch
50 PPDS font error
51 Defective flash
detected
52 Not enough free space
in flash memory for
resources
53 Unformatted flash
detected
Understanding MFP messages
Meaning
The data for a page is too complex to
print.
x is the value of the printer region. y is
the value of the cartridge region.
The message appears when the
printer detects that an installed print
cartridge has a region that differs
from the printer region.
x and y can have the following values:
0: Worldwide region
1: Americas
2: EMEA
3: Asia
4: Latin America
9: Undefined region
The MFP has received a request for a
font that is not installed when
formatting PPDS print data.
The MFP detects a defective flash
memory during power-on or during
flash format and write operations.
There is not enough space in the
flash memory to store the data
currently being downloaded.
The MFP detects unformatted flash
memory.
Attendance messages
114
Action
To avoid this error in the future:
Reduce the complexity of the page by reducing
the amount of text or graphics on the page and
deleting unnecessary downloaded fonts or
macros.
Set Page Protect to On in the Setup Menu in the
Settings menu.
Install additional memory.
Touch Continue to continue printing the job;
however, data will be missing for this page.
Touch Cancel Job to cancel the current job if
needed.
Touch Reset Active Bin to change to another
linked bin.
Replace the print cartridge with one that has a
proper region.
Touch Continue to clear the message and
continue printing the current job.
Touch Cancel Job to cancel the current job if
needed.
Touch Reset Active Bin to change to another
linked bin.
Touch Continue to clear the message and
continue printing the current job.
At power-on reset, touch Continue to clear the
message, and the MFP continues with normal
operations except for flash operations.
Install different flash memory to be able to
download any resources to flash.
Touch Continue to clear the message and
continue the print job.
Install flash memory with more storage capacity.
Download the data.
Touch Cancel Job to cancel the current job if
needed.
Touch Reset Active Bin to change to another
linked bin.
Touch Continue to clear the message and
continue printing. The MFP continues with
normal operations except for flash operations.
Reformat the flash to allow flash operations.
If the error message reappears, the flash
memory may be defective and require replacing.