2D Symbologies; 2D Global Features - Datalogic QuickScan QBT24 series Product Reference Manual

2D Global Features

• 2D Maximum Decoding Time on page 180
• 2D Structured Append on page 181
The reader supports the following 2D symbologies (bar code types). Symbology-dependent
options for each symbology are included in this chapter. See
page 87 for configuration of 1D bar codes.

2D Symbologies

• Aztec Code on page 182
• China Sensible Code on page 185
• Data Matrix on page 188
• Maxicode on page 191
• PDF417 on page 194
2D Global Features
The following features are common to all, or in some cases, most of the available 2D symbolo-
gies. Default settings are indicated at each feature/option with a green arrow. Also reference
Appendix B, Standard Defaults
tings. That section also provides space to record any custom settings needed or implemented
for your system.
To set most features:
1. Scan the ENTER/EXIT PROGRAMMING bar code at the top of applicable programming
pages.
2. Scan the correct bar code to set the desired programming feature or parameter. You may
need to cover unused bar codes on the page, and possibly the facing page, to ensure that
the reader reads only the bar code you intend to scan.
3. If additional input parameters are needed, go to
priate characters from the keypad.
Additional information about many features can be found in the "References"
chapter.
If you make a mistake before the last character, scan the CANCEL bar code to
abort and not save the entry string. You can then start again at the beginning.
Complete the programming sequence by scanning the ENTER/EXIT PROGRAMMING bar code to
exit Programming Mode.
Product Reference Guide
2D SYMBOLOGIES
for a listing of the most widely used set of standard factory set-
• 2D Normal/Inverse Symbol Control on
page 181
"1D Code Selection"
• Micro PDF417 on page 197
• QR Code on page 200
• Micro QR Code on page 203
• UCC Composite on page 206
• Postal Code Selection on page 208
Appendix D, Keypad, and scan the appro-
starting on
179