Scanning Features; Scan Mode - Datalogic QuickScan QBT24 series Product Reference Manual

Reading Parameters

Scan Mode

Selects the reader's scan operating mode. See
$CSNRM00(CR)
Scan Mode = Trigger Single
$CSNRM02(CR)
Scan Mode = Trigger Pulse Multiple
$CSNRM04(CR)
Scan Mode = Always On
Options concerning Stand Mode behavior are available at the following fea-
ture,
Product Reference Guide

SCANNING FEATURES

Stand Operation on page 77
Enter/Exit Programming Mode
page 254 in "References" for descriptions.
$CSNRM01(CR)
Scan Mode = Trigger Hold Multiple
$CSN-
Scan Mode = Flashing
$CSN-
Scan Mode = Stand Mode
.
DEFAULT
75