Send Control Characters - Datalogic QuickScan QBT24 series Product Reference Manual

Enter/Exit Programming Mode

Send Control Characters

This feature specifies how the reader transmits ASCII control characters to the host. Reference
Appendix E, Scancode Tables
Options are as follows:
Control Character 00 :
keys are located from 0x80 to 0xA1.
Control Character 01 :
keys are located from 0x80 to 0xA1.
Control Character 02 :
are intended as an extended ASCII table (see
page 301).
DEFAULT
$CKBSC01(CR)
Wedge Send Control Characters = 01
44
for more information about control characters.
Characters from 00 to 0x1F are sent as control character Ctrl+Keys, special
Characters from 00 to 0x1F are sent as control character Ctrl+Shift, special
Special keys are located from 00 to 0x1F and characters from 0x80 to 0xFE
"Microsoft Windows Codepage 1252"
$CKBSC00(CR)
Wedge Send Control Characters = 00
$CKBSC02(CR)
Wedge Send Control Characters = 02
QuickScan™ I QD24XX/QBT24XX/QM24XX
on