Micro Qr Code Set Length 1 - Datalogic QuickScan QBT24 series Product Reference Manual

Enter/Exit Programming Mode
Micro QR Code
Set Length 1
Specifies one of the bar code lengths for
is the minimum label length if in
Length Mode. Characters can be set from 0001 to 0035 characters in increments of 0001 (pad
with zeroes).
See page 243 for detailed instructions on setting this feature.
$CMQL1
Select Micro QR Code Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
204
Micro QR Code Length Control on page
Variable Length
0001 = Length 1 is 1 Character
DEFAULT
Mode, or the first fixed length if in Fixed
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits from the Alphanumeric char-
Appendix D, Keypad
acters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
~
QuickScan™ I QD24XX/QBT24XX/QM24XX
203. Length 1
representing your
CANCEL