Setup
Figure 7. Connecting the Base Station
Verify before connection that the reader's cable type is compatible with your
Host Connection:
host equipment.
Most connections plug directly into the host device as shown in
interface cables have a 'Y' connection where its female end mates with the male end of the
cable from the keyboard and the remaining end at the keyboard port on the terminal/PC.
Figure 8. Connecting to the Host
Plug the AC Adapter into an approved AC wall socket with the cable facing
Power Connection:
downwards (as shown in
14
I/F Cable
Base
Station
or...
or...
or...
Figure
7) to prevent undue strain on the socket.
Wall plug
Connector
AC/DC
Adapter
DC Power
Cord
Figure
QuickScan™ I QD24XX/QBT24XX/QM24XX
8. Keyboard Wedge