1D Symbologies
Industrial 2 of 5 Set Length 1
This feature specifies one of the bar code lengths for
140. Length 1 is the minimum label length if in
fixed length if in
Fixed Length on page 113
ters only. The length can be set from 0 to 50 characters.
Table 11
provides some examples for setting Length 1. See
instructions on setting this feature.
Table 11. Industrial 2 of 5 Length 1 Setting Examples
STEP
ACTION
1
Desired Setting
2
Scan ENTER/EXIT PROGRAMMING MODE
3
Scan SELECT INDUSTRIAL 2 OF 5 LENGTH 1 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5
Scan ENTER/EXIT PROGRAMMING MODE
$CU2L1
Select Industrial 2 of 5 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and not save
the entry string. You can then start again at the beginning.
Product Reference Guide
EXAMPLES
00 Characters
'0' and '0'
01 = Length 1 is 1 Character
DEFAULT
Industrial 2 of 5 Length Control on page
Variable Length on page 113
Mode. Length includes the bar code's data charac-
page 243
07 Characters
'0' and '7'
~
Enter/Exit Programming Mode
Mode, or the first
if you want detailed
15 Characters
50 Characters
'1' and '5'
'5' AND '0'
CANCEL
141