Standard 2 Of 5 Set Length 2 - Datalogic QuickScan QBT24 series Product Reference Manual

Enter/Exit Programming Mode

Standard 2 of 5 Set Length 2

This feature specifies one of the bar code lengths for
136. Length 2 is the maximum label length if in
ond fixed length if in
and data characters.
The length can be set from 1 to 50 characters. A setting of 0 specifies to ignore this length
(only one fixed length).
Table 10 provides examples for setting Length 2. See
ting this feature.
Table 10. Standard 2 of 5 Length 2 Setting Examples
STEP ACTION
Desired Setting (pad with
1
leading zeroes)
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT STANDARD 2 OF 5 LENGTH 2 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
$CS2L2
Select Standard 2 of 5 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
138
Fixed Length on page 113
EXAMPLES
00 (Ignore This
Length)
'0' and '0'
DEFAULT
Standard 2 of 5 Length Control on page
Variable Length on page 136
Mode. Length includes the bar code's check
page 243
07 Characters
'0' and '7'
~
50 = Length 2 is 50 Characters
QuickScan™ I QD24XX/QBT24XX/QM24XX
Standard 2 of 5
Mode, or the sec-
for detailed instructions on set-
15 Characters 50 Characters
'1' and '5'
CANCEL
'5' AND '0'