Using The Scanner Buttons; Using The Power Button - Fujitsu ScanSnap N1800 Operator's Manual

2.2

Using the Scanner Buttons

■ Using the Power Button

When the scanner is off or in standby mode, pressing the power button will start the
scanner up and display the login window.
When the scanner is on and a window displaying the [Shutdown] button is shown,
pressing the power button opens a shutdown confirmation window via which the scanner
can be shutdown.
Press Button(*1)
(*1) Other than pressing the power button, any of the following operations will startup
the scanner from standby mode.
Loading the documents into the ADF paper chute.
Closing the top cover.
Pressing the power button.
Pressing the Scan button.
Touching the LCD touch panel.
The window displayed after a re-startup varies according automatic login settings in the
following way:
If automatic login is enabled, the operation window is displayed.
If automatic login is disabled, the login window in displayed.
(*2) The [Shutdown] button is shown on the following windows. Pressing the button
shows a confirmation window from which the power can be turned off.
Shown on the login window, if automatic login is not set.
Shown on the main menu or job menu, if automatic login is set.
Shutdown
LED Dark
Press Button
Operating
LED Lit
Login Window
Login
Operation Windows
No operation
for set period
Standby
LED Lit
59
Press Button(*2)