A.2 Paper Quality - Fujitsu ScanSnap N1800 Operator's Manual

A.2 Paper Quality

Paper Type
The following paper types are recommended for use with the ADF:
Woodfree paper
Wood containing paper
When documents of a paper type other than those listed above are scanned, perform the
test-scan with a same paper type first to check if the document can be scanned without
problem.
Paper Weight
The following paper weights can be used with the ADF:
52 to 127 g/m
For A8 and business card size, 127 g/m
Precautions
The following documents may not scan successfully:
Documents of non-uniform thickness (e.g. envelopes and documents with
attachments)
Wrinkled or curled documents (See the following hint)
Folded or torn documents
Documents with appended photographs, notes, etc.
Tracing paper
Coated paper
Carbon paper
Carbonless paper
Photosensitive paper
Perforated or punched documents
Documents that are not square or rectangular
Exceptionally thin documents (less than 52 g/m
Do not attempt to scan the following types of documents:
Paper-clipped or stapled documents
Documents on which the ink is still wet
Documents smaller than A8 Portrait
Documents wider than 216 mm (8.5 in.)
Non-paper documents (such as fabric, foil, transparent paper, and plastic card)
Valuable documents that must not be damaged or dirty, such as certificate and
cash voucher
2
(14 to 34 lb)
474
2
only
2
)