Fujitsu ScanSnap N1800 Operator's Manual page 434

11. Attach the sheet guide.
Squeeze the pickup tabs at both ends of the sheet guide with your fingers, and fit it
back onto its original location.
The tab snaps open.
Make sure that the sheet guide is firmly and fully inserted. If it is not correctly
attached, document jams and other feeding errors may occur.
12. Close the top cover.
You should hear a click.
AUTION
13. Attach the ADF paper chute.
Push the ADF paper chute until it locks into place, inserting the tab of the ADF
paper chute into the hole on the back of the scanner.
Install the ADF paper chute so that the side guide faces upward.
14. Reset the pick roller usage counter.
The usage counter must be reset by an administrator. For details, refer to
"Resetting the Usage Counter" (page
Be careful that the top cover does not shut on your fingers.
171).
434
7.5 Replacing Parts
Pickup tab