Setting The Scan Options; Setting The Multifeed Detection Method - Fujitsu ScanSnap N1800 Operator's Manual

Network scanner
Hide thumbs Also See for ScanSnap N1800:
Table of Contents

Advertisement

4.6

Setting the Scan Options

4.6.1 Setting the Multifeed Detection Method

"Multifeed" is an error that occurs when two or more sheets are fed simultaneously into
the ADF. The detection of the difference in length is also regarded as multifeed.
By default, multifeed detection monitors for paper overlaps in the central column (25 mm
either side from the center of the document) of the document being scanned.
If stickies, slips, photos, or other paper ("attached paper" from here on) are attached on
the documents, this section is considered to be an overlap causing unnecessary detection
as multifeed. When scanning those documents, you can adjust the multifeed detection
area to ignore a specific area with attachments such as photos and prevent mis-
detections.
The "intelligent multifeed detection" allows the length and position of the attached paper
to be memorized in the scanner so that the multifeed will not be detected from the next
scan.
For document requirements for multifeed detection, refer to
Conditions" (page
1. Select [System Settings]
The [Multifeed Settings] window appears.
478).
[Scanner Settings]
102

4.6 Setting the Scan Options

Central Admin
Console
"A.5 Multifeed Detection
[Multifeed Settings].

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents