Updating The Scanner Settings - Fujitsu ScanSnap N1800 Operator's Manual

5.11 Updating the Scanner Settings

The scanner settings can be updated by uploading new sets of scanner settings and
setting update calls.
The new set of scanner settings will be released, and applied to the scanners when one of
the following occurs:
Scanner is started, or resumed from the standby mode
Scanner is logged out
Scanner is notified of any update modules
Scanner has an automatic update scheduled
When update calls are set up, updates can be applied to the scanners that are in power-
off or standby mode using Wake-On-LAN.
If the update is released while the user is logged into a scanner, the module will be
applied after you log out.
If scanner settings are already available, the scanner settings are replaced.
The scanner settings can be updated according to the time specified on the scanner
side.
For details, refer to
1. Press the [Admin Operations] button in the Central Admin Console main
window.
The [Scanner Admin Operations] window appears.
2. Select the [Scanner Settings] link.
The [System Settings] window appears.
"4.8.9 Setting a Central Admin Server" (page
266

5.11 Updating the Scanner Settings

125).