Cleaning The Carrier Sheet - Fujitsu ScanSnap N1800 Operator's Manual

7.4

Cleaning the Carrier Sheet

Use a soft dry cloth, a cloth slightly moistened with Cleaner F1 or a mild detergent, or the
Cleaning Wipe to clean the carrier sheet.
Lightly wipe off the dirt and dust from the surface and interior of the carrier sheet.
As the carrier sheet is repeatedly used, dirt and dust may collect on the surface of or
inside the carrier sheet.
To prevent scanning malfunction, the carrier sheet should be regularly cleaned.
Never use paint thinner or other organic solvents.
Do not rub too hard, as the carrier sheet may become scratched or deformed.
After cleaning the interior of the carrier sheet, wait until it has completely dried
before closing it.
As a guideline, it is recommended to replace the carrier sheet every 500 scans.
For details about purchasing a carrier sheet, refer to
Sheet" (page 435).
425
"7.5.5 Purchasing the Carrier