Replacing The Pick Roller - Fujitsu ScanSnap N1800 Operator's Manual

7.5.4 Replacing the Pick Roller

1. Remove any documents from the ADF paper chute.
2. Remove the ADF paper chute.
Hold the ADF paper chute by both ends, and lift it while leaning it towards the front.
3. Pull the top cover release catch toward you, place your hands at both
sides of the top cover, and open the top cover.
4. Remove the sheet guide.
Squeeze the pickup tabs at both ends of the sheet guide with your fingers, and lift
the sheet guide up and away.
Be careful that the top cover does not shut on your fingers.
AUTION
430
7.5 Replacing Parts
Pickup tab