Fujitsu ScanSnap N1800 Operator's Manual page 320

For distribution lists
On the [Distribution List] tab, enter the list name and e-mail addresses to be added
to the distribution list.
For details about e-mail address settings values, refer to
Setting Values" (page
e-Mail addresses can be selected from the e-mail address book, which can be
accessed by pressing
Target from the e-Mail Address Book" (page
If the e-mail address book cannot be used, contact the administrator.
6. Press the [OK] button.
The e-mail addresses and distribution lists are added to your My List.
My List can also be edited using User Editor.
For details, refer to
6.4 Sending the Scanned Data by e-Mail
483).
. For details, refer to
"Appendix E Editing Using User Editor" (page
320
"B.1 e-Mail Address
"6.4.1 Selecting an e-Mail
313).
496).