Fujitsu ScanSnap N1800 Operator's Manual page 239

Follow the instructions displayed on the window.
When "Installation complete" is displayed, the installation is complete. Press the
[Close] button.
After installation is completed, log out from the scanner on the Web browser and
close the Web browser.
After installation, the Central Admin Console can be started by selecting the
[Start] menu - [All Programs] - [Scanner Central Admin Server] - [Scanner
Central Admin Console].
If an older version of Central Admin Console is installed, uninstall it before installing
the latest version of Central Admin Console.
From the Web browser [Tools] menu, select [Internet Options], and note the
following points about the settings shown on the [Internet Options] dialog box.
In the [Accessibility] dialog box shown when pressing the [Accessibility] button
on the [General] tab, do not change the formatting and user style sheet
settings. If these settings are changed, the displayed style of the Central Admin
Console may be corrupted.
In the [Language Preference] dialog box shown when pressing the
[Languages] button on the [General] tab, move the same language as that of
the Central Admin Server's operating system to the top. If a different language
is specified, a problem may occur with the input or displays for the Central
Admin Console.
On the [Security] tab, if [Security level for this zone] is set to [High], part of the
Central Admin Console window may not be correctly displayed.
In this case, on the [Security] tab, add the scanner or Central Admin Server to
the trusted site zone and press the [Default Level] button. Or press the [Custom
Level] button and set [Binary and script behaviors] to [Enable].
On the [Advanced] tab, select the [Play animations in webpages] check box
under [Multimedia].
In Windows Server 2003 or Windows Server 2008, this check box is not
selected by default.
When the font size is large, part of the dialog box may not be shown correctly. In this
case, use a smaller font size.
For details about the operating environment required for installing the Central
Admin Server software, refer to
(page 47).
When installing the Central Admin Console, the same necessary pre-settings
before logging in with the Admin Tool are required. For details, refer to
up for Administrator Access via the Admin Tool" (page
"1.4.2 Requirements for Central Admin Console"
239
"4.2.2 Setting
80).