Network Requirements For Central Admin; Scanner Requirements For Central Admin - Fujitsu ScanSnap N1800 Operator's Manual

1.4.5 Network Requirements for Central Admin

This section describes the required network conditions for Central Admin.
For Central Admin, the following network conditions are required.
HTTP/HTTPS communication is possible from the Central Admin Server to the
scanner
HTTP/HTTPS communication is possible from the scanner to the Central Admin
Server
HTTP/HTTPS communication is possible from the Central Admin Console to the
Central Admin Server
Wake-On-LAN Magic Packet routing is possible from the Central Admin Server to
the scanner (when Wake-On-LAN is used)
The connection between a scanner and Central Admin Server has the following
limitations.

1.4.6 Scanner Requirements for Central Admin

Up to 1,000 scanners can be managed with Central Admin.
If 1,000 scanners are registered on the server, no more scanners can be registered as
targets for central admin. If the number of scanners exceeds 1,000, multiple Central
Admin Servers will be prepared. The target scanners for each server should not exceed
1,000.
Communication via an HTTP proxy is not supported.
Networks where IP addresses using NAT/NAPT are not supported.
52
1.4 System Requirements