Fujitsu ScanSnap N1800 Operator's Manual page 213

11. Change the position of the job buttons as necessary.
Select the job button to move, and then select either the [ ] button or the [ ] button
to move it.
The relationship between the order of job buttons on the [Job Menu Layout] area
and the arrangement of buttons on the [Job Menu] is shown below.
12. For [Message Screen], set whether to show [Message Screen] on the
[Job Menu] window.
13. For [Scan Viewer], set whether to show [Scan Viewer] on the [Job Menu]
window.
14. Press the [OK] button.
A job menu is added to the [Job Menus List] window.
213