Installing An Add-In - Fujitsu ScanSnap N1800 Operator's Manual

5.10 Installing an Add-in

An Add-in for scanner can be installed by uploading an Add-in module and setting update
calls. Up to six Add-in modules can be installed.
The new Add-in update module will be released, and applied to the scanners when one of
the following occurs:
Scanner is started, or resumed from the standby mode
Scanner is logged out
Scanner is notified of any update modules
Scanner has an automatic update scheduled
When update calls are set up, updates can be applied to the scanners that are in power-
off or standby mode using Wake-On-LAN.
If the Add-in module is already available, the module is replaced. However, if the date of
the last modified Add-in module version is the same as, or earlier than the currently
available one, the module cannot be uploaded.
Add-ins can be updated according to the time specified on the scanner side.
For details, refer to
1. Press the [Admin Operations] button in the Central Admin Console main
window.
The [Scanner Admin Operations] window appears.
2. Select the [Add-in Installs] link.
The [Add-in Installs] window appears.
"4.8.9 Setting a Central Admin Server" (page
263
125).