Setting The Ftp Server Folders; Registering An Ftp Server Folder - Fujitsu ScanSnap N1800 Operator's Manual

4.12.2 Setting the FTP Server Folders

A list of FTP server folders may be set as [Save] targets for scanned data.
Any FTP server folder can be specified as an FTP server folder.
Up to the total of 100 FTP server folders and network folders can be added.
For details about setting network folders, refer to
(page 143).
For details about setting a file name for scanned data to be saved in an FTP server folder,
refer to "4.12.4 Setting a File Name Format for When Saving Scanned Data" (page
Note the following when registering an FTP server folder.

■ Registering an FTP Server Folder

1. Select [Network Settings]
The [FTP Server Folder] window appears.
The FTP server folder is registered as a network path. If the FTP server folder is on
a Windows file server and the length of the full Windows path including the file
name exceeds 259 characters, the scan data will not be saved. Before registering a
FTP server folder, check that the length of the full file path+name is not likely to
exceed 259 characters.
If the selected folder was created using a language foreign to that of the browsing
operating system, the FTP server folder may not register correctly.
If the name of the FTP server folder contains unrecognizable characters, check the
codeset used.
For FTP path, user name, and password, alphanumeric characters and symbols
with the exception of " \ / : ; * ? " < > | # & % " can be used.
"4.12.1 Setting the Network Folders"
[FTP Server Folder]
149
Central Admin
Console
[FTP Server Folder].
156).