Managing The System Log; Viewing The System Log Details - Fujitsu ScanSnap N1800 Operator's Manual

4.14.5 Managing the System Log

Up to 1,000 system information logs (such as for startup, shutdown, and system errors)
are saved in the scanner.

■ Viewing the System Log Details

The system log summary is shown in date/time order. Even if the [Region/Timezone] or
[Date/Time] settings are changed, the order of the log entries will not be changed.
1. Select [Monitoring & Management]
The [System Log] window appears.
2. Select the log you wish to view.
The details of the selected log are displayed.
Pressing the [OK] button returns to the [System Log] window.
System logs may contain private information such as e-mail addresses or fax
numbers, so care should be taken when managing such data.
If a log file error is detected during scanner operation, the log file will be cleared and
the log entry "Error 81001003 Corrupted system log file was deleted." is recorded.
The [Date] format specified on the [Date/Time] window is used. For details, refer to
"4.5.4 Setting the Date/Time" (page
The information of "Error" and "Warning" in [Type] will be sent to the e-mail address
set in "4.16.6 Setting the Destination for Alert Notifications" (page
[Status Details]
98).
175
[System Log].
194).