Saving Settings - Lexmark 5400 Series User Manual

Saving settings

In a setting menu, an * appears next to the default setting. To change the setting:
1
Press or repeatedly until the setting you want appears.
2
Press :
•
To save most settings. An * appears next to the saved setting.
•
To select a temporary setting. An * appears next to the selected setting.
Note: The printer reverts to the default setting of a temporary setting after two minutes of inactivity or if the printer
is turned off.
Temporary settings
Copy Mode
Scan Mode
Fax Mode
Photo Card
To change the time-out feature:
a
Press .
b
Press or repeatedly until Tools appears.
c
Press .
d
Press or repeatedly until Device Setup appears.
e
Press .
f
Press or repeatedly until Clear Settings Timeout appears.
g
Press .
–
Copies
–
Resize
–
Lighter/Darker
–
Quality
–
Repeat Image
–
N-Up
–
Original Size
–
Original Type
–
Quality
–
Original Size
–
Resize
–
Lighter/Darker
–
Quality
The following Photo Card settings will not time-out after two minutes of inactivity
or turning off the power but will return to the factory default settings when a memory
card or flash drive is removed.
–
Photo Effects
–
Paper Size
–
Photo Size
–
Layout
–
Quality
–
Paper Type
31