Can Receive But Not Send Faxes - Lexmark 5400 Series User Manual

Check whether Fax
Forwarding is selected

Can receive but not send faxes

Check mode selection
Check document
placement
Check the Dial Prefix
setting
Check Speed Dial
number
1
From the control panel, press Fax Mode.
2
Press .
3
Press or repeatedly until Fax Setup appears.
4
Press .
5
Press or repeatedly until Ringing and Answering appears.
6
Press .
7
Press or repeatedly until Fax Forward appears.
8
Press .
9
Press or repeatedly to view the current Fax Forwarding setting.
10
To turn off Fax Forwarding, press
11
Press to save the setting.
To make sure the printer is set for faxing, press Fax Mode.
Load the original document facedown in the ADF or in the upper left corner of the scanner glass.
1
From the control panel, press Fax Mode.
2
Press .
3
Press or repeatedly until Fax Setup appears.
4
Press .
5
Press or repeatedly until Dialing and Sending appears.
6
Press .
7
Press or repeatedly until Dial Prefix appears.
8
Press .
9
To change the setting, press
10
Press .
11
Enter the prefix to be dialed before each telephone number.
12
Press .
•
Check to make sure Speed Dial has been programmed for the number that you wish to dial.
See "Setting up Speed Dial numbers" on page 74.
•
As an alternative, dial the telephone number manually.
or repeatedly until Off appears.
or repeatedly until Create appears.
104