Lexmark 5400 Series User Manual page 113

Failed to Connect
(check that printer detects dial
tone)
Fax Error
Fax Mode Unsupported
Invalid photo/paper
size selection
Left Cartridge Error /
Right Cartridge Error
Including:
•
1205 (Left Cartridge)
•
1206 (Right Cartridge)
Left Cartridge
Incorrect / Right
Cartridge Incorrect
Make sure the printer is detecting a dial tone.
•
See "Sending a fax while listening to a call (On Hook Dial)" on page 72.
•
Check the Dial Method setting.
1
Listen for a dial tone. If you hear a dial tone, but the printer hangs up without
dialing, this means it did not recognize the dial tone.
2
From the control panel, press Fax Mode.
3
Press .
4
Press or repeatedly until Fax Setup appears.
5
Press .
6
Press or repeatedly until Dialing and Sending appears.
7
Press .
8
Press or repeatedly until Dial Method appears.
9
Press .
10
Press or repeatedly until the method you want appears.
11
Press to save this setting.
The fax machines have stopped communicating.
Resend the fax. There may have been a problem with the quality of the telephone line
connection.
The receiving fax machine does not support the type of fax you attempted to send. If it
does not support:
•
Your scan resolution—lower the scan resolution.
1
From the control panel, press Fax Mode.
2
Press .
3
Press or repeatedly until Quality appears.
4
Press .
5
Press or repeatedly until a lower quality appears.
6
Press .
•
Legal-size paper—reformat the document on letter-size paper.
You have selected more than one option on step 2 of the photo proof sheet you printed
and scanned.
1
Make sure you completely fill in only one circle for each option.
2
Press to continue.
1
Remove the indicated print cartridge.
2
Disconnect the power cord from the electrical outlet.
3
Reconnect the power cord to the electrical outlet.
4
If the button is not lit, press
5
Reinsert the print cartridge.
6
If the error:
•
Does not reappear, the problem has been corrected.
•
Reappears, replace the print cartridge with a new one.
.
113