Cannot Scan To A Computer Over A Network; Fax Troubleshooting; Cannot Send Or Receive A Fax - Lexmark 5400 Series User Manual

Cannot scan to a computer over a network

Review scanning steps See "Scanning to a computer over a network" on page 68.

Fax troubleshooting

•
"Cannot send or receive a fax" on page 102
•
"Can send but not receive faxes" on page 103
•
"Can receive but not send faxes" on page 104
•
"Printer receives a blank fax" on page 105
•
"Received fax has poor print quality" on page 105
•
"Caller ID information is not displayed" on page 106

Cannot send or receive a fax

Check messages
Check power
Check cable
connections
Check the telephone
wall jack
Review digital phone
service checklist
Verify dial tone
Disconnect other
equipment temporarily
Check for paper jams
If an error message is displayed, follow the instructions on the error message dialog.
If the light is not on, see "Power button is not lit" on page 94.
Make sure cable connections for the following hardware are secure, if applicable:
•
Power supply
•
Telephone
•
Handset
•
Answering machine
1
Plug a telephone into the wall jack.
2
Listen for a dial tone.
3
If you do not hear a dial tone, plug a different telephone into the wall jack.
4
If you still do not hear a dial tone, plug a telephone into a different wall jack.
5
If you hear a dial tone, connect the printer to that wall jack.
The fax modem is an analog device. Certain devices can be connected to the printer so that
digital telephone services can be used.
•
If you are using an ISDN telephone service, connect the printer to an analog telephone port
(an R-interface port) on an ISDN terminal adapter. For more information and to request an
R-interface port, contact your ISDN provider.
•
If you are using DSL, connect to a DSL filter or router that will support analog use. For more
information, contact your DSL provider.
•
If you are using a PBX telephone service, make sure you are connecting to an analog
connection on the PBX. If none exists, consider installing an analog telephone line for the
fax machine. For more information on faxing when using a PBX telephone service, see
"Setting up to fax while behind a PBX" on page 77.
•
Place a test call to the telephone number to which you want to send a fax to make sure that
it is working correctly.
•
If the telephone line is being used by another device, wait until the other device is finished
before sending a fax.
•
If you are using the On Hook Dial feature, turn up the volume to verify a dial tone.
To ensure the printer is working correctly, connect it directly to the telephone line. Disconnect
any answering machines, computers with modems, or telephone line splitters.
Check for and clear any paper jams.
102