Table of Contents
Advertisement
Field Service Ver. 7.0 Jan. 2009
Memory transmission
Forwarding
transmission
Interruption
transmission
International
communication
V34-off transmission
Long original
transmission
ADF irregular-size
transmission
Incomplete TX hold
Instant batch
transmission
(Bundled transmission)
Y104784-2
Quick
Mixture of ADF/
memory
platen documents
transmis-
Advanced com-
sion
munication func-
tion
Manual transmis-
sion
Transmission
when the printer
is active
Memory
ADF transmission Yes
transmis-
sion
Platen transmis-
sion
Mixture of ADF/
platen documents
Advanced com-
munication func-
tion
Manual transmis-
sion
Transmission
when the printer
is active
Yes
• Automatic forward: Automatic forward of received documents to remote sta-
tions registered in advance.
• Manual forward: No
Single station transmission reservation automatically interrupts between sta-
tions of multiple station communications.
Yes
• When the remote station is V17, communications start at TCM 7,200 bps.
When the remote station is V34, they start at 28,800 bps.
Transmitted without V34 mode. The V34-off appointment can be registered in
the abbreviated / program dials. This is used when the transmission error
code related to V34 occurs frequently.
Varies depending on models.
Refer to "10.3 Differences of Functions by Model (as of Jan, 2009)".
See P.188
Varies depending on models.
(Possible to transmit irregular-size originals from ADF. The main scanning is
the max. document width set on ADF, and the sub scanning depends on doc-
ument length. The maximum is 432 mm/17 inches.)
No
No
Service Manual
1. OUTLINE OF THE DEVICE
No
Partly Yes
(Only the communication mode is possible)
Yes
No
Yes
After the Separate Scan setting, the setting
is read with the [Start] key and the communi-
cation is started up with the [Finish] key.
Yes
After the Separate Scan setting, the setting
is read with the [Start] key and the communi-
cation is started up with the [Finish] key.
Yes
No
Yes
7
Advertisement
Table of Contents
