Outline Of The Device - Olivetti FK-502 Service Manual

Hide thumbs Also See for FK-502:
Table of Contents

Advertisement

Field Service Ver. 7.0 Jan. 2009
OUTLINE
1.

OUTLINE OF THE DEVICE

1.1
Basic specifications
1.1.1
General specifications
Applicable lines
Protocol
Maximum data rate
Coding method
Modulation method
Communication
resolution
Fax memory size
FAX memory backup
Multiple line
connection
Communication time
Y104784-2
PSTN
Group 3 (compliant to ITU-T T.30)
• ECM
• F-code communication
• Olivetti non-standard protocol: No
• Group 4: No
33,600 bps
MH, MR and MMR, JBIG
V27ter, V29, (V.33), V17, V8 and V34
• V.33 is for reception only.
Normal
Fine
Super fine
Ultra Super fine
• Fixed to mm at transmission (except 600 dpi)
• mm and inch are available at reception.
• Selection by using the [Resolution] key.
• You can not change settings on every page.
With HDD installed
With no HDD installed
*HDD is provided as a standard supply or optionally depending on models.
Refer to "10.3 Differences of Functions by Model (as of Jan, 2009)".
See P.188
With HDD installed
Two lines can be connected by installing the Line Extension kit.
Level of 2 seconds (Olivetti standard A4 chart, 33,600 bps)
Service Manual
1. OUTLINE OF THE DEVICE
8 x 3.85 lines / mm
8 x 7.7 lines / mm
200 x 200 pixels / inch
8 x 15.4 lines / mm
16 x 15.4 lines / mm
400 x 400 pixels / inch
600 x 600 pixels / inch (Transmission only)
27 GB (27 GB in the main body HDD 40 GB/60
GB is used as a memory.)
9000 pages can be stored including all Scan/Box/
Printer/Fax documents.
Approx. 2000 pages can be saved at 32 MB of
image memory capacity.
Image data is saved in HDD.
1

Advertisement

Table of Contents
loading

Table of Contents