Reception Function - Olivetti FK-502 Service Manual

Field Service Ver. 7.0 Jan. 2009
3.3

Reception function

3.3.1 Reduction / division of reception
• Parameters related to reduction / division are set on the [Utility/Counter] > [Administrator
Setting] > [Fax Setting] > [TX/RX Setting]. There are two parameters as follows:
"Min. Reduction for RX Print"
"Print Separate Fax Pages"
The reception recording mode is determined by the above-mentioned parameters, a and b.
A. Auto reduction reception mode
a = Don't care (except 100)
b = OFF
The received documents are automatically reduced in the range of 35 to 96 %.
Page division recording reception mode
a = 96, 95, ..., 87
b = ON
Documents are reduced to three reduction rate (90 %, 86 %, or 82 %) determined by
the width of received documents and the selected recording paper. When they are still
larger than a paper size, they are reduced to a value in "a" for the division recording.
90% = Fixed value
86%, 82% = Reduction rate determined by the main scanning direction
The paper selection and division are determined in accordance with the following fig-
ure.
B. Paper selected for division printing, magnification
(1) A4SEF width at reception
Original length
Optimum
=Received origi-
paper
nal size*(1/a)
152mm or less A5LEF
153 - 311mm A4SEF
312 - 384mm B4SEF
Over 384mm A3SEF
Y104784-2
96, 95, 94, ..., 87 a
ON, OFF
Selected paper size / Division operation
Priority Priority Priority
1 2 3
A5LEF A5SEF A4SEF
/ a % / 69 % / a %
A4SEF A4LEF B4SEF
/ a % / a % / a %
B4SEF B5LEF B5SEF
/ a % / a % / 84 %
A3SEF A4LEF B5SEF
/ a % / a % / 84 %
Service Manual
3. EXPLANATION OF FUNCTIONS
b
Priority Priority Priority
4 5 6
A4LEF B5SEF B5LEF
/ a % / 84 % / a %
A3SEF
- -
/ a %
A3SEF A4LEF A4SEF
/ a % / a % / a %
- - -
Priority Priority
7 8
B4SEF A3SEF
/ a % / a %
- -
- -
- -
53