Olivetti FK-502 Service Manual page 145

9. TROUBLESHOOTING
Code No. Category
T87 Not used
T88 Not used
T89 Control unit
T90 Not used
T91 Not used
T92 Not used
T93 Not used
T94 Not used
T95 Call control
T96 Not used
T97 Transfer
T98 Transfer
T99 Call control
R00 Reception
R01 Reception
R02 Reception
R03 Reception
R04 Reception
R05 Not used
R06 Not used
R07 Reception
R08 Reception
R09 Reception
R10 Reception
R11 Reception
* The corresponding error code is not displayed on the control panel even if the error occurs.
138
Contents of Error
When the control unit is connected,
a communication error is caused
due to capacity shortage and com-
munication is finished.
When called, short disconnection
of LOOP current was detected dur-
ing a call
Transmission request was received
with no fax board installed. *
Transmission request of images
that cannot be transmitted were
received. *
(Color images)
Remote stations number is deleted
while waiting for abbreviated or
one-touch re-dialing (redial / trans-
mission / polling reception) *
DCS was not received within 35
seconds (T1 over)
T1 timeout after EOM sending
DCN reception in DCS waiting
Unexpected command reception in
DCS waiting
FIF error of DCS
Image information does not come
in image information waiting
CD OFF while receiving image
information
DCN reception in post message
waiting
Unexpected command reception in
post message waiting
Command was not received which
waiting for post message
Service Manual
Field Service Ver. 7.0 Jan. 2009
How to correct
The dialed telephone number may
be incorrect.
The line may be disabled because
the user on the remote station dis-
connected it.
The line may be disabled because
the user on the remote station dis-
connected it.
The line may be disabled because
the user on the remote station dis-
connected it.
Y104784-2