Table of Contents
Advertisement
4. REPLACEMENT PROCEDURE
72
3. Remove the Fax Multi Line kit. (6
screws, PCI board connector)
4. Remove the cover of Fax Multi Line
kit. (6 screws)
5. Pull out the FK-502 board. (2 hinge
screws)
NOTE
• When pulling out the FK-502 board,
be sure to hold the 2 hinge screws
provided at the upper and lower
sections and pull them out to this
side.
• When reinstalling the FK-502 board,
be sure to insert it with the board
set to the groove.
• Reinstall the above parts following
the removal steps in reverse.
Service Manual
Field Service Ver. 7.0 Jan. 2009
Y104784-2
Advertisement
Table of Contents
