Table of Contents
Advertisement
1. OUTLINE OF THE DEVICE
(*2): The long original, Z-folded original, TX stamp, sharpness and quick memory TX func-
tions are available or not depending on models.
Refer to "Differences of Functions by Model (as of Jul. 2007)".
See P.188
(*3): No combination is allowed for MF35
(*4): An F code transmission is ignored when it is sent to any receiving ends other than
FAX.
(*5): Automatically reset when the original is read with the platen glass.
(*6): The Internet fax is TIFF fixed. The IP address fax is TIFF fixed in the monochromatic
transmission mode and PDF fixed in the color transmission mode.
(*7): For the network fax (Internet fax/IP address fax), the use of the comm. setting is
unavailable.
(*8): In the color transmission mode of the IP address fax, it is not possible to specify den-
sity and sharpness.
1.5
Caution when using prefix/suffix auto setting
(North American users only)
When turning ON the [Prefix/Suffix Auto Setting], following settings are required in the ser-
vice mode.
• Select [System 2]-[Option Board Status] and set the fax to [Unset].
• Select [System 1]-[Marketing Area] and set the [Marketing Area] and [Fax Target] to the
place of installation of the unit.
20
Service Manual
Field Service Ver. 7.0 Jan. 2009
Y104784-2
Advertisement
Table of Contents
