Table of Contents
Advertisement
4. REPLACEMENT PROCEDURE
64
5. Remove the cover of Fax Multi Line
kit. (6 screws)
6. Pull out the FK-502 board. (2 hinge
screws)
NOTE
• When pulling out the FK-502 board,
be sure to hold the 2 hinge screws
provided at the upper and lower
sections and pull them out to this
side.
• When reinstalling the FK-502 board,
be sure to insert it with the board
set to the groove.
• Reinstall the above parts following
the removal steps in reverse.
Service Manual
Field Service Ver. 7.0 Jan. 2009
Y104784-2
Advertisement
Table of Contents
