Table of Contents
Advertisement
Field Service Ver. 7.0 Jan. 2009
(3) T.89 (Application profile for ITU-T T.88)
124
125
0
0
0
0
0
1
0
1
1
0
1
0
1
1
1
1
NOTE
• Considered to be A4 width when the DIS recording paper width is invalid (1, 1).
Becomes a FIF error when the DCS recording paper width is invalid (1, 1).
• Considered to be unlimited when the DIS recording paper length is invalid (1, 1).
Considered to be unlimited when the DCS recording paper length is invalid (1, 1).
The DCS recording paper length in a machine is made to be of the same length as
that in a remote station and is sent.
• Considered to be 2400bps when the DIS transmission speed is an undefined
value.
Becomes a FIF error when the DCS transmission speed is an undefined value.
• Considered to be 40ms instruction when the MSLT of DCS is an undefined value.
• Considered to have mm ability when DIS inch ability and mm ability are both set to
OFF.
Considered to be 200*100 pels/inch when the DCS resolution receives the inch
instruction at 3.851/mm.
Becomes a FIF error when more than one of bit41, 42 and 43 are set to on in the
resolution of DCS.
• Becomes a FIF error when DCS receives the MMR instruction without ECM.
• Becomes a FIF error when DCS receives the file transfer (BFT) instruction without
ECM.
• Becomes a FIF error when DCS shows an instruction which exceeds the ability of
the machine.
• FIF of DIS/DTC is not sent if last octet is 0.
DCS sends FIF whose length is the same as that of the machine.
• When undefined signals are received, they are received and ignored in consider-
ation of the future expansion. (not a error)
Y104784-2
126
0
not used
1
Profile 1
0
Profile 2
1
Profile 3
0
Invalid
1
Reserved
0
Reserved
1
Reserved
Service Manual
2. COMMUNICATION CONTROL
Contents
31
Advertisement
Table of Contents
