Table of Contents
Advertisement
Field Service Ver. 8.0 Jul. 2009
4. Set the parameter setting.
5. Press the [END] key to return Service Mode screen.
Parameter
Journal Diagnosis Code
Addition
Report Addition Information
TX Result Report
Protocol Trace Auto Output
B. Detailed explanation
(1) Journal DIagnosis Code Addition
• When set to "ON,"
- An error code is shown on the communication journal and the screen.
- The diagnosis code is printed on the communication journal.
(2) Report Addition Information
• Diagnosis Code: The diagnosis code is printed on the communication journal.
• Dial Number: The dial number is printed on the communication journal.
(3) TX Result Report
• Even if set to "With image" images are not attached at the time of the quick memory
transmission and the manual transmission.
Y104784-2
Set Value
ON/OFF
Diagnosis Code / Dial Num-
ber / OFF
With image / Without image
Always / Error / OFF
Service Manual
7. SERVICE MODE
Factory-shipped
default setting
OFF
Yes
OFF
Yes
With image
Yes
OFF
15LAF3E029DB
Reference
103
Advertisement
Table of Contents
