Table of Contents
Advertisement
4. REPLACEMENT PROCEDURE
In the case of d-Color MF35/MF30/MF25Plus/MF25
4.5
Removal of the FK-502 (d-Color MF35/MF30/MF25Plus/MF25)
4.5.1
• In order to replace the FK-502, remove the FK-502 in the following order.
NOTE
• Be sure to check to see if the main power switch is turned off.
• The board may be damaged due to static electricity. Be sure to take an appropriate
measure against static electricity before conducting the operations.
70
1. Turn off the main power switch and
the power switch of the main body,
and then unplug the power cord from
the power outlet.
2. Remove the Telephone line cable
that is connected.
3. Remove the lower rear cover. (7
screws)
4. Pull out the dust proof filter provided
on the rear side of the main body.
5. Remove the upper rear cover. (4
screws)
Service Manual
Field Service Ver. 7.0 Jan. 2009
Y104784-2
Advertisement
Table of Contents
