2.12. Laser Unit (429), Feed Roller (618), Paper Feed Roller (746), Clutch Gear
Assembly (660), Paper Feed Solenoid (744), Fan Unit (622)
(4)
(5)
(3)
(2)
(6)
(7)
(8)
(9)
(1) Remove the the Front Cover (105), Rear Cover (108)
(Refer to 2.3.), Paper Guide Cover (110) (Refer to 2.4.),
Control Panel Unit (Refer to 2.5.), and Motor Bracket and
Gear Assembly (Refer to 2.11.).
(2) Disconnect Connectors.
(3) 2 Screws (19).
(4) Remove the Laser Unit (429).
(5) Remove the E34 Drive Gear (620).
Note:
When reassembling, apply KS-660 Conductive Grease to the
end of the Feed Roller Shaft (618).
(6) 2 Screws (19).
(7) Remove the Feed Roller (618).
(8) 2 Screws (19).
(9) Remove the Paper Feed Roller Assembly.
45