9.5
Installing Page Description Language Printer Emulation Kit (UE-403169)
1. Contents
No.
Part No.
1.
DZEC101411
2.
DZJH000059
3.
DZQW000179
4.
DZSD001051
5.
DZSH000080
6.
DZSM000247
2. Installation
Before proceeding with the installation, verify that your machine has the appropriate Optional Firmware (V2.0000 or later) by
checking the Function Parameter No. 60. If not, refer to page 52 of the Service Manual on how to create a Master Firmware
Card.
Note: The Master Firmware Card is Not included with this kit.
(2)
(1)
(3)
(7)
(8)
(7)
(9)
Description
Enhanced Printing PC Board w/ FRM PC Board
PCB Spacer
Printer Driver Disks
User's Guide
License Agreement
Installation Guide
(6)
(5)
(7)
(9)
Qty.
1
1
1
1
1
1
(1) Turn the Power Switch to the OFF (O) position.
(2) Disconnect the Power Cord.
(3) Disconnect the Telephone Line Cable and Ethernet LAN
Cable.
(4) Open the Control Panel.
(5) Remove 1 Screw.
(6) Remove the Memory Card Cover.
(7) Remove 4 Screws.
(8) Remove the Sub Rear Cover.
(9) Remove 4 Screws.
320
Remarks
-
-
6 disks, 3½" 2HD Floppy
This document