Panasonic DX-2000 Service Manual page 176

• MASK
If this switch is present, the next parameter is interpreted as the netmask parameter.
• Netmask
If included, specifies a sub-net mask value to be associated with this route entry. If not specified, it defaults to
255.255.255.255.
• Gateway
pecifies the gateway.
• METRIC
Specifies the metric / cost for the destination.
All symbolic names used for the destination are looked up in the network database file NETWORKS.
The symbolic names for the gateway are looked up the host name database file HOSTS.
When the packet does not reach the specified destination even when the physical connection is properly made, check the
registered persistent routes on the same subnet as the DX-2000 by typing "route print" in the DOS command-line. The output
display is shown below:
C:\WINDOWS>route print
Active Routes:
Network Address
0.0.0.0
127.0.0.0
192.168.3.0
192.168.3.2
192.168.3.255
224.0.0.0
255.255.255.255
6. Host Name Query on DNS Server
Windows NT 4.0 also has a tool that enables you to test DNS to verify that it is working properly. This utility is not available
on Windows 95 /98.
From the DOS command-line, type "NSLOOKUP" to display the following output:
NS(Name Server) record in Domain
From the DOS command-line, type "Is -t NS <Domain Name>" to display the following output:
MX(Mail Exchange) record in Domain
From the DOS command-line, type "Is -t MX <Domain Name>" to display the following output:
A (Address) record in Domain
Netmask
0.0.0.0
255.0.0.0
255.255.255.0
255.255.255.255
255.255.255.255
224.0.0.0
255.255.255.255
C:\>nslookup
Default Server: sv1.labo.mgcs.com
Address: 192.168.1.1
> ls -t NS labo.mgcs.com.
[sv1.labo.mgcs.com.]
labo.mgcs.com. NS server = sv1.labo.mgcs.com
> ls -t MX labo.mgcs.com
[sv1.labo.mgcs.com]
labo.mgcs.com.
Gateway Address Interface
192.168.3.254 192.168.3.2
127.0.0.1 127.0.0.1
192.168.3.2 192.168.3.2
127.0.0.1 127.0.0.1
192.168.3.2 192.168.3.2
192.168.3.2 192.168.3.2
192.168.3.2 192.168.3.2
MX 10 sv2.labo.mgcs.com
176
Metric
1
1
1
1
1
1
1