Before Loading Paper - Panasonic KX-F1600 Operating Instructions Manual

Before loading paper
To ensure trouble-free paper handling, set the paper thickness lever and the paper selection lever before
loading the paper.
Setting the paper thickness lever
You can use the paper thickness lever to adjust the distance between the print head and the paper.
Normally set the lever to the left position. Paper
thickness
oSet the lever to the center position when;
— printing in color
— printing on color ink jet paper, ink jet glossy paper, ink
jet transparency film, or ink jet back print film.
oSet the lever to the right position when printing on thick
paper or envelopes.
Note:
o When you receive or copy documents with a large image area, the received or copied documents may have
smeared parts. In this event, set this lever to the center position.
oAlways reset this lever when you change print cartridges.
Setting the paper selection lever
You must set the paper selection lever according to the paper you use.
Be sure to remove all of the paper from the paper tray before setting the paper selection lever.
Normally set this lever to the back position.
oSet this lever to the front position for envelopes or thick
paper.
ZN
Front Back
M, Paper selection
L
Note:
oDo not move this lever after loading paper in the paper tray.
oThis lever is different from a lever on a typewriter or dot matrix printer. You need not pull it forward to load
paper.
13
NANTE
DE Ce