Table of Contents
Advertisement
(22) 1 Screw (19) and remove the Ground Strap (540).
(25)
(24)
(23) Disconnect Connector CN11 on the FCB PC Board.
(24) Remove the Harness from the clamp.
(25) Remove the Control Panel Unit.
(23)
(22)
(26) Remove the Battery Holder (1114) Assembly.
(28)
(26)
(27) Release 4 Latch Hooks.
(28) Remove the Control Panel Chassis (216).
(27)
(29) Disconnect Connector CN41 on the PNL PC Board.
(29)
(30) 15 Screws (7B).
(31)
(30)x15
(31) Release two Latch Hooks.
(32) Remove the PNL PC Board (214).
(32)
30
Advertisement
Table of Contents
Troubleshooting
