Table of Contents
Advertisement
4.6.5.
Reception Problems
Does the machine answer the
Ringing signal?
Is the received copy OK?
Any other problems?
4.6.6.
Polling Problems
Is Polling reception OK?
Any other problems?
Note: No-check Mode means that password is not set.
START
Yes
Yes
No
END
START
No
Yes
Yes
No
END
No
1. Set "RCV = AUTO".
2. Check that all covers are closed firmly.
3. Check the telephone line connection.
4. Check the Ringer Timing or DRD setting.
5. Check the recording paper path.
6. Check CN3 (FCB PCB) and CN25 (LCU PCB).
7. Replace the LCU PCB.
8. Replace the FCB PCB.
No
Make a copy and refer to Sect. 4.4.14.
Yes
See Sect. 4.3 (Troubleshooting using
information codes).
1. Set the same polling password as the other party is using.
2. Check the password of the remote unit.
See Sect. 4.3 (Troubleshooting using information codes).
170
Advertisement
Table of Contents
Troubleshooting
