5 Service Modes
5.1
Service Mode Table
The following service modes are provided to assist you in setting operational functions of the unit and determining the condition of
the unit.
No.
1
Function Parameter Setting
2
Not used
3
Print Parameter List / Reports
4
Modem Tests
5
Diagnostic
6
RAM Initialization
7
LBP Service Mode
8
Check & Call
9
System Maintenance
Service Mode
Allows changes to the function parameters (the home position, etc...).
Prints the Function Parameter List, Page Memory Test, Printer Report,
All Document File, Protocol Trace and Toner Order Form.
Generates various binary, tonal and DTMF signals, by the modem.
Performs various hardware tests.
Initialize RAM and restore the default value of the function parameters.
Changes the Printer Parameters (the home position, etc.).
Allows input of information for Service Alert Report, Maintenance Alert
Report and Toner Order Form.
Used for Firmware Update, Firmware Backup, Parameter Restore,
Parameter Backup, Transferring Firmware from the PC to the Flash
Card and Sending a Received File during a fatal printer error.
193
Description