Panasonic DX-2000 Service Manual page 212

5.3.5 Protocol Trace
Print a Protocol Trace Report for the previous communication.
Step
1 Standby
2 Press "FUNCTION" and then "7".
3
Press "MONITOR" four times, then press "
4 Press "3".
5 Press "6" and "START".
6 After printing is completed, the unit returns to the display in step 3.
7 Press "STOP" to return to standby.
Operation or Unit Condition
∗
".
*************** PROTOCOL LOG. REPORT ****************** DATE SEP-12-1999 ***** TIME 16:56 *******
STATUS : OK
MODE : ECM-TX (STANDARD)
SPEED : 9600bps 0MS/L
REMOTE CAPA. : DIS 00 CE B9 C4 80 12
LOCAL CAPA. : TSI 2B 20 20 20 38 37 2B 2B 2B 2B
39 38 36 36 35 34 37 38 38 30
DCS 00 C6 F8 44
COMMAND LOG.
REMOTE : NSF CSI DIS
LOCAL :
------------------------------------------------------------------
REMOTE : MCF
LOCAL : DCN
****************************-PANAFAX DX-2000-*************-12345678901234567890-*****************
CFR
TSI DCS PIX PPS-EOP
-PANASONIC DX-2000-
212
LCD Display
SEP-12-1999 15:00
00%
SET MODE (1-6)
ENTER NO. OR
SERVICE MODE
ENTER NO. OR
PRINTOUT (1-7)
1:FUNC. PARAM. LIST
* PRINTING *
PROTOCOL TRACE
SERVICE MODE
ENTER NO. OR
SEP-12-1999 15:00
00%