Table of Contents
Advertisement
4.4.8.
Light Print
Is the printout in Service Mode 3
normal?
Is the recording paper damp?
Is the Toner Cartridge operational?
Are there any foreign particles or
stains blocking the Laser Unit
path?
Is the HVPS normal?
Are the Fuser and Pressure Roller
surfaces clean?
START
Yes
No
Yes
No
No
Yes
Yes
No
No
Yes
No
Yes
END
154
Check the Scanner mechanism.
Replace the paper.
Replace the Toner Cartridge.
1. Remove the particles from the laser
beam path or clean the stains.
2. Replace the LSU.
1. Check all connectors and
voltages on the HVPS.
2. Replace the HVPS.
Clear or replace the rollers.
Advertisement
Table of Contents
Troubleshooting
