Panasonic DX-2000 Service Manual page 181

4.7.5 Troubleshooting with Information Codes
The displayed 3-digit information codes, show the unit's status. These codes are also printed on the journal. The following
table indicates the appropriate sections for troubleshooting.
Code Mode
710 XMT/RCV
712 XMT
713 XMT/RCV
714 XMT
715 XMT
716 XMT
717 XMT/RCV
719 RCV
725 XMT
726 XMT
730 RCV
731 RCV
870 RCV
Code
710
713
714
715
717
719
720
721
725
726
730
731
870
Information Codes (SMTP INFO. CODES)
Explanation
Command response between LANC/LANB PCB
timed out
Unknown email address replied from the Mail
Server
Memory overflow in the LAN Interface.
(Document data exceeded 1.6 Mbyte/page and
cannot be sent)
LAN Interface error. Cannot logon to the LAN
Timeout (no reply from the mail server), 3 min
TCP/IP connection timed out, 3 min
Cannot logon to the LAN
(Connection error, 4 min)
Incomplete SMTP protocol transmission
Received data via LAN is in a format that is not
supported (non-TIFF file)
DNS Server connection timed out
Protocol error, received an error response from
the DNS Server
Fax protocol error, unable to program the
Internet Parameters or the Autodialer with Email
from a PC
Fax protocol error.
Transmission Request was received
Fax memory overflow occurred while storing
documents into memory
Information Codes (POP3 INFO. CODES)
Explanation
Command response between LANC/LANB PCB
timed out
Memory overflow in the LAN Interface.
(Document data exceeded 1.6 Mbyte/page and
cannot be sent)
LAN Interface error. Cannot logon to the LAN
Timeout (no reply from the mail server), 3 min
TCP/IP connection timed out, 3 min
Incomplete POP3 protocol transmission
Received data via LAN is in a format that is not
supported (non-TIFF file)
Unable to connect with the POP Server.
Protocol error (incorrect POP Server address)
Unable to login to the POP Server. Protocol
error (incorrect User Name of Password is set)
DNS Server connection timed out
Protocol error, received an error response from
the DNS Server
Fax protocol error, unable to program the
Internet Parameters or the Autodialer with Email
from a PC
Fax protocol error. Dialer full while Relayed
Transmission Request was received
Fax memory overflow occurred while storing
documents into memory
While the TCP connection was open
SMTP Command Reply to "RCPT TO:"
Data Block
Data Block
Data Block
TCP 3 way Handshake
Data Block
After the TCP connection was closed
Opening session
Opening session
- - -
Dialer full while Relayed - - -
SMTP Command Reply
While the TCP connection was open
Transaction
Transaction
Transaction
Transaction
Update
Authorization
Authorization
Opening session
Opening session
Transaction
Transaction
Transaction
181
Timer/SMTP Reply Code
State