UF-5500 / 4500
10 Service Mode
10.1. Service Modes (For Facsimile)
10.1.1. Service Mode Table
The following service modes are provided to assist you in setting operational functions of the unit and determining the condition of
the unit.
Caution:
The factory default parameters are preset (destination dependent) for optimum performance and in compliance with the local
telecommunication regulations/standards, and do not need to be changed. Changing some of these parameters may cause the
unit to be no longer compliant or become inoperable.
Note:
When changing the set values on the service function table, they should not be set beyond the local regulation.
Follow the laws and regulations of your area.
No.
Service Mode
1
Function Parameter Setting
2
RAM Edit Mode
3
Print Parameter List / Reports
4
Modem Tests
5
Diagnostic
6
RAM Initialization
7
LBP Service Mode
8
Check & Call
9
System Maintenance
Allows changes to the function parameters
(the home position, etc.).
Factory use only.
Prints the Function Parameter List, Page Memory Test, Printer Report, All
Document File, Protocol Trace, Toner Order Form and Drum Order Form.
Generates various binary, tonal and DTMF signals, by the modem.
Performs various hardware tests.
Initialize RAM and restore the default value of the function parameters.
Changes the Printer Parameters.
Allows input of information for Service Alert Report, Maintenance Alert
Report, Toner Order Form and Drum Order Form.
Used for Firmware Update and Sending a Received File during a fatal
printer error.
92
Description