Table of Contents
Advertisement
For hearing or speech impaired TTY users, TTY: 1-877-833-8855
For support:
(for customers in the U.S.A. or Puerto Rico)
— VISIT
www.panasonic.com/help
— E-MAIL
www.panasonic.com/contactinfo
— PHONE CALL
1-800-211-PANA (7262)
Operating Instructions
with Digital Answering System
Model No.
Please read these operating instructions
before using the unit and save for future
reference.
This unit is compatible with Caller ID. You
must subscribe to the appropriate service
of your service provider/telephone
company.
Compact Plain Paper Fax
KX-FP215
Advertisement
Table of Contents
Need help?
Do you have a question about the KX-FP215 and is the answer not in the manual?
Questions and answers
my phone is not ringing how do I turn it on again?
To turn on the ringer for the Panasonic KX-FP215 phone, press the {A} button.
This answer is automatically generated
@Mr. Anderson sorry but it did not work
Why is my machine no longer able to leave a message, nor hear my message on how to.
The Panasonic KX-FP215 may not be able to leave or hear messages for the following reasons:
1. The unit is not in TAM/FAX mode. It must be switched to TAM/FAX mode.
2. The remote operation ID (code) may not be entered correctly or firmly.
3. A voice mail service from the telephone company may interfere. You should either deactivate the voice mail service or subscribe to a Distinctive Ring service.
4. The recording time may be set to “GREETING ONLY”. It should be changed to “1 MINUTE”, “2 MINUTES”, or “3 MINUTES”.
5. The memory may be full. Unnecessary messages should be erased.
6. Another answering machine may be connected to the same line, which should be removed.
This answer is automatically generated
Callers no longer getting message nor able to leave a message
Callers may be unable to leave a message on the Panasonic KX-FP215 for the following reasons:
1. The unit is not in TAM/FAX mode. It must be set to TAM/FAX mode.
2. The recording time is set to “GREETING ONLY”. It should be set to 1, 2, or 3 minutes.
3. The memory is full. Unnecessary messages should be erased.
4. Another answering machine is connected to the same line.
5. Voice mail service from the telephone company is active, which may interfere with message reception. It is recommended to deactivate voice mail service or use a Distinctive Ring service.
This answer is automatically generated
I have a {Panasonic KX-FP215 phone and I am getting a message that tells me the ring is not connected and I cannot fine in the manual how to get the ring tone back on.
To restore the ringtone on a Panasonic KX-FP215, follow these steps:
1. While the unit is idle and no documents are in the document entrance, press the {A} or {B} button to adjust the ringer volume.
2. Press {A} repeatedly until the desired ringer volume is heard.
3. If the display shows “RINGER OFF= OK?”, press {B} to cancel the ringer off setting and restore the ringtone.
This will reactivate the ringtone on the device.
This answer is automatically generated