UF-5500 / 4500
11.2.7.4. Reception Problems
Does the machine answer
the Ringing signal?
Is the received copy OK?
Any other problems?
11.2.7.5. Polling Problems
Is Polling reception OK?
Is Polling transmission OK?
Any other problems?
Note:
No-check Mode means that password is not set.
START
No
Yes
No
Yes
Yes
No
END
START
No
Yes
No
Yes
Yes
No
END
1. Set "RCV = AUTO"
2. Check that all covers are closed firmly.
3. Check the telephone line connection.
4. Check the Ringer Timing, or DRD setting.
5. Check the recording paper path.
6. Check CN100 (MAIN PCB).
7. Replace the MAIN PCB.
Make a copy, and refer to Sect. 4.4.14.
See Sect. 4.3. (Troubleshooting with the
Information Codes).
1. Set the same polling password as the other party
is using.
2. Check the password of the remote unit.
1. Set the polling password or no - check mode.*
2. Check the password of the remote unit.
See Sect. 4.3
(Troubleshooting with the Information Codes).
156